505热镀锌钢格栅板的用途有很多种，称重量也是很好的，203热镀锌钢格栅板则是扁铁的厚度是2公分高度是3毫米厚的，有的客户会提到，203热镀锌钢格栅板与505热镀锌钢格栅板的区别在于哪里，为什么价格也是不一样。
There are many uses of 505 hot-dip galvanized steel grille plate, weighing is also very good, 203 hot-dip galvanized steel grille plate is flat iron thickness is 2 cm height is 3 mm thick, some customers will mention, 203 hot-dip galvanized steel grille plate and 505 hot-dip galvanized steel grille plate difference lies in where, why the price is different.
热浸镀锌制件漏镀面的总面积不应超过制件总表面积的0.5，每个漏镀面的面积不应超过10Cm2，当供需双方没有其他协议时，若漏镀面积大于上述规定值，这些制件应予重镀。
The total surface area of the hot dip galvanized parts should not exceed 0.5 of the total surface area of the parts, and the area of each surface should not exceed 10 Cm2. If the leakage area is larger than the specified value, the parts should be re-plated if there is no other agreement between the supplier and the demander.
钢格板的包装标志应标明商标或生产厂代号、钢格板型号及标准号。
The packing mark of steel grating should be marked with trademark or factory code, steel plate type and standard number.
每块钢格板均应标明编号，外包装上标明：货物名称、内包装明细、合同号、收货人姓名及电话、发货人及电话、目的地。
Each grille shall be numbered and marked on the outer packing: name of goods, details of internal packing, contract number, name of consignee and telephone number, consignor and telephone number, destination.
由于钢格板的设计要符合国家标准，因此其绘图设计具有较强的规律性，如同平台板型号基本一致，间隙基本固定，宽度、长度等可按型号进行选取等等；充分利用这些规律可大大提高设计效率，为实现设计生产的数字化提供了可行性。
Because the design of steel grille plate conforms to the national standard, its drawing design has strong regularity, such as the type of platform plate is basically the same, the gap is basically fixed, the width and length can be selected according to the type, etc. The feasibility.
首先确定钢格栅板变形程度大小，如果影响了钢格栅板的安装使用或非常不美观，可以联系厂家要求调换或退货；如果小的变形，不影响钢格栅板的使用。
First of all, determine the extent of deformation of steel grille plate, if it affects the installation and use of steel grille plate or very ugly, can contact the manufacturer to request replacement or return; if small deformation, do not affect the use of steel grille plate.
钢格栅板的制造方法、技术条件和公差要求基本与英国标准相同，BS4592-1钢格栅板的制造方法除了焊接钢格板外，还有压锁钢格板和铆接钢格板，98标准也由《压焊钢格栅板》改名为《钢格栅板》。
The manufacturing method, technical conditions and tolerance requirements of steel grille plate are basically the same as those of British standard. The manufacturing method of BS4592-1 steel grille plate includes press-lock steel grille plate and riveted steel grille plate as well as welded steel grille plate. Standard 98 was renamed "steel grille plate" from "press-welded steel grille plate".
铆接钢格板由于其经济性差,所以越来越少采用，98标准定义钢格板包括压焊钢格板和压锁钢格板，但侧重于描述压焊钢格板。
Riveted grilles are less and less used because of their poor economy. Standard 98 defines grilles as compression welded and locking grilles, but focuses on describing compression welded grilles.
钢格板的规格，不再局限于91标准所规定的59种规格,取消了原来划分的三个系列，根据负载扁钢和横杆的排列间距，采用了更为直观的命名方法来表示钢格栅板的型号。
The specifications of steel grille are no longer limited to 59 specifications stipulated in 91 standard. Three series of steel grille are cancelled. A more intuitive naming method is adopted to represent the type of steel grille according to the arrangement distance between flat steel and cross bar.