德州通风管道知名加工厂

钢格栅板的制作方法：

The making method of steel grille plate:

压焊钢格栅板是由负荷扁钢和横杆按一定间距经炜排列，采用200吨液压电阻焊自动化设备焊接成原板，经切割，开孔，包边等工序加工而成客户要求的产品。

The pressure welded steel grille plate is arranged by the load flat steel and the cross bar according to a certain distance. It uses 200 ton hydraulic resistance welding automation equipment to weld into the original board, and then processes the products which are required by customers through cutting, opening and wrapping.

受荷扁钢间距：两相邻受荷扁钢的中心距，常用30MM，40MM及60MM三种。

Loaded flat steel spacing: two adjacent loaded flat steel center distance, commonly used 30MM, 40MM and 60MM three.

横杆间距：两相邻横杆的中心间距通常为50MM，100MM，两种。

Cross bar spacing: the center spacing of two adjacent bars is usually 50MM, 100MM, and two kinds.