| 插接钢格板的类型 |
| 添加时间：2019/11/20 14:32:12 浏览次数： |
| 插接钢格板的类型 Type of plug-in steel grating 插接钢格板普通型 ：它是由承载扁钢切槽后，和横杆扁钢压锁成型，它的承载扁钢的最大加工高度为100mm，长度通常小于2000mm。 Ordinary type of plug-in steel grating: it is formed by cutting groove of bearing flat steel and pressing lock of horizontal bar flat steel. The maximum processing height of bearing flat steel is 100mm, and the length is usually less than 2000mm 2.插接钢格板整体型 ：它是由具有相同高度且都切槽1/2的承载扁钢和横杆扁钢压锁成型的，其承载扁钢高度不大于100mm，其长度通常小于2000mm。 2. Integral shape of plug-in steel grating: it is made of bearing flat steel and horizontal bar flat steel with the same height and 1 / 2 of all slots. Its bearing flat steel height is not more than 100mm, and its length is usually less than 2000mm. 3.插接钢格板遮阳型 ：它的承载扁钢开30°或45°斜槽，槽杆扁钢开槽压锁成型。根据不同需要可交工其他间距、规格的钢格板，可使用普通碳钢、不锈钢、铝等材料。 3. Plug in steel grating sunshade type: its bearing flat steel is provided with 30 ° or 45 ° inclined groove, and the flat steel of the groove bar is provided with groove and pressed lock. According to different needs, other spacing and specifications of steel grating can be delivered, and ordinary carbon steel, stainless steel, aluminum and other materials can be used. 4.插接钢格板重载型 ：其受高扁钢和横杆扁钢互相咬合、在1200吨的压力下压紧成型，通常适用于跨距高承荷载场合。 4. Plug in steel grating heavy-duty type: it is occluded by high flat steel and horizontal bar flat steel, compressed and formed under the pressure of 1200 tons, which is generally suitable for high span load-bearing occasions. |
| 上一页 镀锌钢格栅板（钢格板）的面积核算 |
| 下一页 钢格板长度和宽度所允许的偏差都为±5mm |
Copyright © 技术支持：遨游网络